Industrial 4G LTE Routers | 5G Industrial Routers

● Support GPS
● Provide GPRS Point-to-Point solution, eliminating the inconvenient of wiring and low cost of installation.

● It allows to be connected to your remote RS232 serial equipments.

● Support network auto-connecting, it can automatically restore the connection to ensure user data integrity under any condition.

● With simple configuration makes user instantly configure without extra programming needed.

● An embedded Watchdog circuit is provided to avoid equipment shutting down.

● An embedded powerful TCP/IP protocol stack.

● Customized products are available to meet with customer’s special demands.

Trial Sample

Low Consumption Design
Support multi-sleep and trigger modes to save power consumption

Supply 5 I/O
Compatible 2 pulse wave output channels,2 analog inputs and one pulse input counter

Multiple Online/Offline Trigger Modes
Support several online trigger ways,including SMS,ring and data,support link disconnection when timeout

Suppot SMS Backup
Modem will switch to SMS state to send the data by SMS when GPRS/3G Internet is down or data center is off. Modem can switch back to communication state from SMS state when GPRS/3G Internet or data center recovers.。

Support Real-time on/off Line
The power consumption is less than 1mA in scheduled power off mode

Support APN/ VPDN network
Improve the security of data transmission.

Provide management software for remote management

Convenient configuration and maintenance interface

Cellular Specification

Item	Content
Cellular Module	Industrial cellular module
Standard and Band	EGSM900/GSM1800MHz, GSM850/900/1800/1900MHz(optional) Compliant to GSM phase 2/2+ GPRS class 10, class 12(optional)
Bandwidth	85.6Kbps
TX power	GSM850/900: <33dBm GSM1800/1900: <30dBm
RX sensitivity	<-107dBm

GPS Specification

Item	Content
GPS Module	Industrial GPS Module
Receiver Type	50 Channels GPS L1（1575.42MHz）C/A Code SBAS:WAAS，EGNOS，MSAS，GAGAN Compatible: GALILEO
Maximum Navigation Update Rate	4 Hz
Horizontal position accuracy	Autonomous：2.5m CPE SBAS：2.0m CPE
Time-To-First -Fix	Cold Start(Autonomous)：29S Warm Start(Autonomous)：29S Aided Starts：<1S Hot Starts(Autonomous)：<1S
Sensitivity	Tracking & Navigation：-160dBm Reacquisition：-160dBm Cold Start(Autonomous)：-144dBm
Timing Accuracy	RMS：30ns 99%：<60ns Granularity：21ns
Time Pulse Frequency	Configurable 0.25Hz to 1000Hz

Hardware System

Interface Type

Item	Content
Serial	1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5, 2 Parity: none, even, odd, space, mark Baud rate: 110~230400 bps
Indicator	"Power", "ACT", "Online", "GPS"
Antenna	Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional) GPS: Standard SMA female interface, 50 ohm, lighting protection(optional)
SIM/UIM	Standard 3V/1.8V user card interface, 15KV ESD protection
Power	Terminal block interface, reverse-voltage and overvoltage protection

Power Input

Power Consumption

Physical Characteristics

Item	Content
Housing	Iron, providing IP30 protection
Dimensions	91x58.5x22 mm
Weight	210g

Environmental Limits

Item	Content
Operating Temperature	-25~+65ºC (-13~+149℉)
Extended Operating Temperature	-30~+75ºC (-22~+167℉)
Storage Temperature	-40~+85ºC (-40~+185℉)
Operating Humidity	95% ( unfreezing)