News of Four-Faith, IoT Industry News| Four-Faith

Introduction to 10 Gigabit Ethernet Switches

A 10 Gigabit ethernet switch refers to a device capable of delivering more than 10 gigabits of throughput in one second.

What is a Point to Point Wireless Bridge Outdoor? Introduction to the Settings of the Wireless Bridge

Point to Point Wireless Bridge Outdoor

A point to point wireless bridge outdoor is a bridging of wireless networks, which can bridge communication between two or more networks (a point to point wireless bridge outdoor is also a branch of wireless AP). I...

Knowledge About the 4G Mobile Signal Booster

4G Mobile Signal Booster

Nowadays, 4G mobile phones are becoming more and more popular, and 4G mobile signal boosters are also getting more and more attention. The key role of the mobile phone is to make calls, but the most important thing when making a call is the signal of the mobile phone.

What is the Modbus TCP Gateway? The Difference Between to the Modbus RTU and Modbus TCP

Modubs TCP gateway Modbus RTU gateway

A Modbus gateway is a device that converts the Modubs TCP gateway protocol to the Modbus RTU gateway protocol. It can be understood as an industrial router that supports the modbus protocol. I believe that if you call it this way, you will understand it better. Modbus is widely used in the field of meters and sensors, and the data of the meters and sensors can be obtained.

What is Modbus Communication Protocol? Introduction to the Characteristics of Modbus TCP/IP Protocol

Modbus Communication Protocol

MODBUS/TCP is a derivative of the simple, vendor-neutral MODBUS series of communication protocols used to manage and control automation equipment. Obviously, it covers the use of MODBUS telegrams in "Intranet" and "Inte...

What is Wireless Data Transmission? Introduction to the Types and Applications of Wireless Data Transmission

Wireless Data Transmission

Wireless data transmission refers to the use of wireless data transmission modules to remotely transmit data or various physical quantities output by industrial field equipment. It can perform wireless analog quantity acquisition or wireless switch quantity control. If the transmission is switch quantity, it can be done remotely. Device telemetry remote control.

What's the Difference Between 2.4 G and 5G? Introduction to the Difference Between 2.4G and 5G

What s the Difference Between 2 4 G and 5G

What's the difference between 2.4 g and 5g? 2.4g and 5g mainly refer to signals of two different frequency bands, mainly in terms of transmission range and network speed. The former band has a relatively short ...

What is ZigBee Protocol in IoT? Introduction to the ZigBee Standard

ZigBee Protocol in IoT

ZigBee, also known as ZigBee, is a wireless network protocol for low-speed short-distance transmission. The bottom layer is the media access layer and physical layer using the IEEE 802.15.4 standard specification. The ...

What is a Wireless Communication Module? Advantages of Wireless Communication Modules

Wireless Communication Module

Wireless communication modules are widely used in vehicle monitoring, remote control, telemetry, small wireless networks, wireless meter reading, access control systems, cell paging, industrial data acquisition systems, wir...

The Method of Point-to-point Wireless Bridge to Avoid Interference

Point-to-point Wireless Bridge

The access point still acts as a central controller for wireless stations in its BSS (Basic Service Set), but it only communicates with one other wireless bridge. Through the "Preferred BSS ID" setting, the MAC of ...

View details